Interface Configuration And Assignment Of Mode - HEIDENHAIN iTNC 530 Service Manual

Hide thumbs Also See for iTNC 530:

Table of Contents

16.7.2 Interface Configuration and Assignment of Mode

Press the following key combination to call the main screen for interface configuration:

interface setup

Operating mode /

The data interface RS-232-C (V.24) is configured on the left side of the screen, and the data

interface RS-422-C (V.11) on the right. The operating mode and the baud rate can be selected.

To edit the operating mode, baud rate and assignment of interfaces:

Select the Programming and Editing operating mode

Press the MOD key.

Call the setup menu for the serial data interfaces.

Move the cursor to the entry you wish to edit.

Press the GOTO key to display a popup window. Place the cursor at the

desired value.

Confirm with ENTER.

To leave the interface settings press the END soft key.

The iTNC 530 recognizes automatically, when the LSV-2 protocol is used (e.g., data transfer

with TNCremoNT). It is not necessary to set the line Operating mode!

HEIDENHAIN Service Manual iTNC 530