HEIDENHAIN iTNC 530 Service Manual page 477

MP
MP120.x
MP121.0
MP121.1
MP130.x
MP131.x
MP131.0
MP131.1
MP132.x
MP132.0
MP132.1
MP210
May 2006
Function and input
Nominal speed value outputs of the axes
Input:0: No servo-controlled axis
1 to 6: Analog outputs 1 to 6 at terminal X8
7 to 12: Analog outputs 7 to 12 at terminal X9
51 to 62: Digital output X51 to X62
Nominal speed command output of the first spindle
Input:0: No servo-controlled axis
1 to 6: Analog outputs 1 to 6 at terminal X8
7 to 12: Analog outputs 7 to 13 at terminal X9
51 to 62: Digital output X51 to X62
Nominal speed command output of the second spindle
Input:0: No servo-controlled axis
1 to 6: Analog outputs 1 to 6 at terminal X8
7 to 12: Analog outputs 7 to 13 at terminal X9
51 to 62: Digital output X51 to X62
Y index of the machine parameters MP2xxx.y for the axes
Input: 0 to 12
Y index of the machine parameters MP2xxx.y for the
spindle(s) in operating mode 0
Input: 0 to 12
Index for the first spindle
Index for the second spindle
Y index of the machine parameters MP2xxx.y for the
spindle(s) in operating mode 1
Input: 0 to 12
Index for the first spindle
Index for the second spindle
Counting direction of the encoder signals of the position
encoder
Format:%xxxxxxxxxxxxxx
Input:Bits 0 to 13 represent axes 1 to 14
0: Positive
1: Negative
Behavior/
SW vers.
RESET
RESET
RESET
PLC
RUN
PLC
RUN
PLC
RUN
RESET
30 – 477