HEIDENHAIN iTNC 530 Service Manual page 518

Hide thumbs Also See for iTNC 530:

Table of Contents

Function and input

Graphic display mode

Format:%xxxxxxxx

Input:Bit 0 – Projection in three planes:

0: German-preferred projection

1: US-preferred projection

Bit 1 – Rotating the coordinate system in the

working plane by 90°:

0: No rotation

1: Rotation by +90°

Bit 2 – BLK form after datum shift:

1: Not shifted

Bit 3 – Display of the cursor position:

0: Not displayed

1: Displayed

Bit 4 – Reserved

Bit 5 – Reserved

Bit 6 – Reserved

Bit 7 – Reserved

Tool radius for graphic simulation without TOOL CALL

Input:0.0000 to 99,999.9999 [mm]

Penetration depth of the tool

Input:0.0000 to 99,999.9999 [mm]

M function for graphic simulation

Beginning of graphic simulation

Input:0 to 88

Interruption of the graphic simulation

Input:0 to 88

Specifying the user parameters 1 to 16

Input:0 to 9999.00 (no. of the user para-

Dialog messages for user parameters 1 to 16

Input:0 to 4095 (line number of the PLC

dialog message file)

HEIDENHAIN Service Manual iTNC 530

Troubleshooting