Sticker on the HDR,
shipping brace
Installing the
new HDR
26 – 436
Caution
Observe the ESD precautions. --> See "Important Information" on page 26 – 411!
The original SIK must be inserted into the new HDR.
Loosen the shipping brace. --> See sticker on the HDR.
Insert lock new HDR (please also press the handle down).
Note
The new HDR for the iTNC hard disk is partioned and formatted.
The HeROS operating system and the current NC software are installed (for dual-processor
controls also Windows 2000 is available on hard disk).
The control boots with this software.
If you need another version, please contact your machine manufacturer!
Switch on the machine.
HEIDENHAIN Service Manual iTNC 530