HEIDENHAIN iTNC 530 Service Manual page 255

Hide thumbs Also See for iTNC 530:

Table of Contents

Restoring the

After having finished data back-up and separated the connection, do not forget to restore the

original settings

original network settings of your laptop or of the iTNC.

Enter the original settings and confirm with ENTER.

Delete the newly inserted line in the network settings of the control. --> The line with the

original settings moves again to the top-most position.

If you have overwritten the original settings on the control, you have to enter them again or

copy the back-up file (e.g., ip4n00.a) to file ip4.n00.

The control has to be rebooted to activate the settings!

You can protect the file ip4.n00 with the original network settings.

Call the PLC partition (PLC code number) and subsequently the program manager. Enter the

folder NET. Move the cursor to the file and press the soft keys AUX. FUNCTIONS.

--> PROTECT. A P is shown in the status column for "protected".

Troubleshooting