Service Packs On The Control's Hard Disk - HEIDENHAIN iTNC 530 Service Manual

27.5 Service Packs on the Control's Hard Disk

Service packs are automatically archived on the SYS partition of the control's hard disk.
As of NC software 34049x-02, a selection window can be called in which all available service
packs are shown.
 Call the MP list.
 Press the MOD key.

Press the UPDATE DATA soft key.
 Press the SELECT Soft key.
--> A selection window appears in which all available NC software versions and service packs
are listed.
The active NC software version and the active service packs in the table are marked with a star.
27 – 452
DANGER
Other NC software versions or service packs may only be activated by the machine
manufacturer or in consultation with the machine manufacturer.
See "NC software update" on page 26 – 411
HEIDENHAIN Service Manual iTNC 530