HEIDENHAIN iTNC 530 Service Manual page 480

MP
MP950.x
MP951.x
MP960.x
30 – 480
Function and input
Datum for positioning blocks with M92 for axes 1 to 9
Input:-99,999.9999
[mm] or [°]
Values with respect to the machine datum
Simulated tool-change position for TOOL CALL during mid-
program startup (block scan)
Input:-99,999.9999
[mm] or [°]
Machine datum
Input:–1.79769313486E+308 to
+1.79769313486E+308 [mm] or [°]
Values with respect to the scale reference point
Behavior/
SW vers.
PLC
to +99,999.9999 RUN
PLC
RUN
to +99,999.9999
PLC
RUN
REF
HEIDENHAIN Service Manual iTNC 530