Overview Of Log Entries - HEIDENHAIN iTNC 530 Service Manual

Hide thumbs Also See for iTNC 530:

Table of Contents

Overview of Log Entries

a. Control-in-operation symbol = "* " in the screen display

MAIN ERRCLEARED

MAIN ERR_RECURED

MAIN SOFTKEY

MAIN FILE DEL

MAIN KEYSOURCE

Restart of the control

Error Messages

P --> PLC error message with line number in the

PLC error text file

N --> NC error message with number

Power fail interrupt ! --> Control is switched off by

Result of the file system test:

If the control is not properly shut down, the file

system is checked during the next startup and the

result is entered in the log.

--> Search in the log for "dosfsck -a"

Confirmation of an error message

Error message entered several times

Path with appropriate image file of a pressed soft key

"Control-in-operation" on

"Control-in-operation" off

"Control-in-operation" blinking

Control model and NC software

Faulty files on the hard disk, to be erased during

Test results for fixed cycles and touch probe cycles

Source of the keystrokes