15 – 236
Click No --> Windows is not supposed to be shut down!
You can now see the Windows user interface.
Click on My Computer/Control Panel/Administrative Tools/Computer Management/
Storage/Disk Management.
Here the condition of the data medium (hard disk) is shown, e.g. Healthy
Click with the right mouse button on the drive to be tested.
Click on Properties in the open window.
Click now on Tools and for Error-checking on Check Now (in window Check disk no
additional information has to be selected).
Click on Start
If no error has been detected, the error message Disk Check Complete is displayed.
If you find an error, please contact HEIDENHAIN!
Note
The same test can also be performed with the Command Prompt and the command
chkdsk , e.g., chkdsk C:
HEIDENHAIN Service Manual iTNC 530