Notes On Entering The Code Numbers - HEIDENHAIN iTNC 530 Service Manual

3.3

Notes on Entering the Code Numbers

Example of calling
the active machine
parameter list
3 – 14
Keep the code numbers in confidence!
Code numbers can only be entered in the Programming and Editing mode.
The screen must be blank or the file editor is displayed.
The program manager must not be open (pressing the MOD key would activate the interface
settings screen).
Press MOD and enter the code number. Finish with ENTER.
 Select the Programming and Editing operating mode.
 Call window for code number
Note
The machine manufacturer can define own MP and PLC code numbers.
In this case the HEIDENHAIN code numbers do not function any longer.
--> Contact your machine manufacturer.
As long as the machine parameter list is in the editor no further code number can be entered.
I.e., first close the MP list when you want to enter a new code number
When certain code numbers are entered, new soft keys are displayed, e.g., MP EDIT, PLC
EDIT, OSCI.
With these soft keys you can also change to the corresponding areas without having to enter
the code number again.
After you have entered the code number for the machine parameters the PLC tree can be
seen in the program manager. Only files with the ending .MP are displayed.
 Enter and confirm code number
HEIDENHAIN Service Manual iTNC 530