Setting Limit Values For The Statistics Counters - Siemens SIPROTEC 7SJ62 Instruction Manual

Operators Tools
:
From PC with
®
DIGSI 4
7.1.2.3

Setting Limit Values for the Statistics Counters

From the
Device Front
7-14
67$7,67,&

RI 75,3V
2S+RXUV
Figure 7-17 Setting Statistics Values from the Device Front
In the 6WDWLVWLF window, mark the value that is to be set. With the right mouse but-
ton, open a context menu and select 6HW. See figure 7-18. After the password for in-
dividual settings is entered, the previous value in the window can be overwritten.
®
Figure 7-18 Digsi 4 Setting Statistic Values
In the $1181&,$7,21 sub-menu, use the
and enter this sub-menu. Use the
move with the key to set the Operating Hours Counter. See Figure 7-19. Then
press the key. After the password for individual settings is entered, the cursor
ENTER
blinks and the counter value is highlighted with a box. The value can be overwritten
using the number keys. Confirm the change using the
6(732,17 67$7

2S+UV! !K
Figure 7-19 Setting the Limit Value, Example on the Front Display
The message "$UH \RX VXUH"" appears in the display, with the response "<HV" as
the default. Confirm with the
a change to the limit value is not wanted, press the
is higlighted, and confirm with the
and keys can be used to toggle between "<HV" and "1R."


!KRXU
ENTER ENTER
key to select the sub-item 6HW5HVHW,
key to select the item 6HW3RLQW 6WDW and
ENTER
ENTER key if a change to the limit value is really desired. If
key. Before confirming with the
ENTER
2S+RXUV 2SHU +UV  
0D[
2147483648
ENTER key.
2S+UV ! K
key so that the response "1R"
ENTER
7SJ62 Manual
C53000-G1140-C121-1
key, the