Siemens SIPROTEC 7SJ62 Instruction Manual page 83

CFC
Displaying Masking
in the HMI
7SJ62 Manual
C53000-G1140-C121-1
®
SIPROTEC 4 device information can be connected in a user-specified manner using
the programmable logic components of the DIGSI
implement interlocking checks, create grouped messages, or derive limit value viola-
tion messages.
Information can be both a source and a destination in combined CFC editing. The spe-
cific logic's inputs, e.g. the individual messages that are to be combined to form a
grouped message, must be marked in the 'HVWLQDWLRQ & column. The logic's out-
put, the grouped message in this example, is derived from the 6RXUFH & column.
The masking can be seen in the HMI of the SIPROTEC
• In the main menu, select 6HWWLQJV → 0DVNLQJ ,2 .
0$6.,1* ,2

!%LQDU\ ,QSXWV
!/('
• In the next menu, select 0DVNLQJ ,2 → e.g. %LQDU\ ,QSXWV.
%,1$5< ,13876

!%LQDU\ ,QSXW  ²!
!%LQDU\ ,QSXW  ²!
Figure 4-18 Reading the Masking using the HMI, example Binary Input 2
®
4 CFC. For example, the user can

²! 
²! 

²
²
SIPROTEC 4 Devices
®
4 device.
.
.
4-23