Siemens SIPROTEC 7SJ62 Instruction Manual page 327

From the
Device Front
:
From PC with
®
DIGSI 4
7SJ62 Manual
C53000-G1140-C121-1
With a device ready for operation, first press the
The first menu item ($QQXQFLDWLRQ) is marked.
key to enter the $1181&,$7,21 menu (see Figure 7-1).
Press the
Here, select the menu item (YHQW /RJ (already marked). The (9(17 /2* table ap-
pears.
If no messages are present, then the text "OLVW LV HPSW\" appears. Otherwise im-
portant events and changes in conditions are listed in chronological order (see Figure
7-3 as an example). Upon entering the menu, the newest (last) message is displayed
at first. The applicable date and time are noted in the display line directly above the
message. If the memory for the operating messages is not full, then the end of the en-
tries is indicated by "(1'".
(9(17 /2*

    
5HVHW /('
Example of an Operating Message
Figure 7-3
The [ and keys can be used to move up and down in the Event Log.
key to return to the 0$,1 0(18.
Press the
MENU
Click on $QQXQFLDWLRQ. The options appear in the data window (Figure 7-4).
Double click on the desired message group in the data window, in this case (YHQW
/RJ. A date and time appear in the data window as shown in Figure 7-4.
Double click on the date and time and the contents of the message group are dis-
played in another window.
®
Figure 7-4 DIGSI 4 Selection of Event Log
key. The 0$,1 0(18 appears.
MENU
 
21
in the HMI of the Device
Operators Tools
7-5