Siemens SIPROTEC 7SJ62 Instruction Manual page 325

Binary Outputs
Front Panel Display
PC–Interfaces
7SJ62 Manual
C53000-G1140-C121-1
Indications can be configured to binary outputs for external indication (e.g. annuncia-
tor, sequence-of-events recorder, RTU, etc ), and operate exactly like LEDs. See also
Chapter 5 for details.
To retrieve messages using the front panel display on a device that is ready for oper-
ation:
First press the 0(18 key
FLDWLRQ) is marked.
All menus and message lists begin with a title. The number in the upper right hand cor-
ner of the display indicates the presently selected menu entry or message, and the
total number of menu entries or messages (see Figure 7-1, each first line).
key to go to the $1181&,$7,21 sub-menu, as shown in Figure 7-1. In
Press the
this menu the messages can be reached by entering the associated selection number,
or by selecting the desired entry using the
key. This procedure is described in more detail below.
0$,1 0(18

!$QQXQFLDWLRQ
0HDVXUHPHQW
Selection of Messages on the
Figure 7-1
®
A PC running the DIGSI
of the device or to the DIGSI interface port on the rear of the device to retrieve the mes-
sages. The rear DIGSI port connection can be RS232, RS485, or a multimode fiber
optic. The rear port is typically connected to a station computer or modem.
Details about the operation of DIGSI
ation" handbook, order no. E50417-H1176-C097.
Figure 7-2 Function Selection Window in DIGSI
. The 0$,1 0(18 appears. The first menu item $QQXQ
MENU
and

²! 
²! 
$1181&,$7,21

!(YHQW /RJ
Operator Control Panel
4 program can be connected to the serial port on the front
®
4 are contained in the "DIGSI
®
4
Operators Tools
keys and moving further with the

²!
7ULS /RJ ²!
®
4 Device Oper-


7-3