SIPROTEC 4 Devices
4.4
Control
Remote
Local
4-14
The multiple application possibilities for SIPROTEC
flexible concept for command editing and control.
If the device is integrated into a control system, then command outputs can be remote-
ly controlled via the system interface using telegrams from
q
SCADA or
q
substation controller devices such as SICAM SC.
®
On-site, the SIPROTEC
primary switching equipment using the HMI.
For devices with a four-line display, control operations are carried out using:
• 0DLQ PHQX → &RQWURO → %UHDNHU6ZLWFK → &RQWURO → Equipment and in-
tended direction 21 or 2)) (Figure 4-9), or
• The Function Keys F1 to F4.
The functionality of these keys is programmable using CFC. Their factory default func-
tion does not do any breaker control.
0$,1 0(18
0HDVXUHPHQW
!&RQWURO
&21752/
!%UHDNHU6ZLWFK²!
!7DJJLQJ
On-site Control Using the HMI
Figure 4-9
4 device offers the possibility to control a circuit breaker or
²!
²!
²!
®
4 devices require an equally
&21752/
!%UHDNHU6ZLWFK²!
!7DJJLQJ
²!
%5($.(56:,7&+
!'LVSOD\
²!
!&RQWURO
²!
7SJ62 Manual
C53000-G1140-C121-1