Setting Of Memory Areas And Address Ranges For Read And Write Operations - Siemens SIMATIC RF310M Operating Instructions Manual

8.3.3

Setting of memory areas and address ranges for read and write operations

Selection of memory area
In the data editor, select the memory area of the tag for which you wish to carry out a read or
write operation.
Figure 8-4
Setting of address and length of memory area
In the data editor, set the start address and length of the memory area for which you wish to
carry out a read or write operation.
Figure 8-5
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Selection of memory area
Address and length of memory area
SIMATIC RF310M software
8.3 Edit tag data
39