Information List; A.6 Information List - Siemens SIPROTEC 7SJ62 Instruction Manual

A.6

Information List

NOTE: The following table lists all data which are available in the maximum complement of the device. Dependent on the ordered model, only those data
may be present which are valid for the individual version.
The symbol ' > ' indicates that the source of the indication is a binary input.
O/O – ON / OFF
OUT – Output Indication
SP – Single Point Indication
IntSP – Internal Single Point Indication
SP_Ev – Spontaneous Event
F# Description
3 >Synchronize Internal Real Time Clock
(>Time Synch)
5 >Reset LED (>Reset LED)
>Back Light on (>Light on)
DP
C
CF
MV
LV
Type of Log-Buffers
Informa-
tion
SCBPFG LED BI
IM_EvO
M
SP LED BI
SP O/O LED BI
– Double Point Indication
– Command without Feedback
– Command with Feedback
– Measured Value
– Limit Value
Configurable in Matrix
REL O/O GI
REL O/O GI
REL OM FM O/O GI
SCADA Interface
General IEC 60870-5-103
135 48 1 GI
135 50 1 GI