General Device Settings - Siemens SIPROTEC 7SJ62 Instruction Manual

4.12

General Device Settings

7SJ62 Manual
C53000-G1140-C121-1
The settings of the display to show information of network faults on the LEDs and the
LCD on the front of the SIPROTEC
shown below.
®
Figure 4-25 DIGSI 4, General Device Settings (Targets), example
The setting can also be changed at any time using the HMI on the SIPROTEC
vice: 0DLQ 0HQX → 6HWWLQJV → 'HYLFH.
®
4 device are defined in the DIGSI
SIPROTEC 4 Devices
®
4 window
k4123.gif
®
4 de-
4-29