Siemens SIPROTEC 7SJ62 Instruction Manual page 82

SIPROTEC 4 Devices
®
Figure 4-17 DIGSI 4, Input/Output Masking with the Configuration Matrix, Example
Filter Function
New Information
Function Keys
4-22
With the use of filters, either all information can be displayed or a selection can be
done according to indications, commands, or measured values.
Additionally, there is a filter setting that differentiates between information configured
and not configured.
The filters allows for a quick overview and simple checking of the configuration set-
tings.
Also, columns and rows can be temporarily hidden from view, so that the user can
combine only the sections of the total matrix that are relevant.
A further function of the configuration matrix is the capability to define new information.
This is accomplished by inserting a new line, assigning the appropriate information
type, and configuring the source with an output (binary outputs, LED, etc.). The new
information can also be displayed in the LCD of the SIPROTEC
The function keys on the HMI of the SIPROTEC
monly performed operating functions, e.g. initiation of a control operation. Select the
appropriate function key
(e.g. control command).
®
to in the Source F column for the related information
F1 F4
®
4 device.
4 device can be assigned to com-
7SJ62 Manual
C53000-G1140-C121-1
k4111.gif