7.1.3.2
Energy, Metered Values
Retrieving of
Metered Values
From the
Device Front
7SJ62 Manual
C53000-G1140-C121-1
Measured Values Window in
Figure 7-24
Example of Measured Values shown in
Figure 7-25
In a 7SJ62 device with the maximum configuration, counters are available that sum
the real and reactive energy (:S, :T) separately, according to reporting and recording
of the real energy and capacitive and inductive reactive energy, in the direction of the
protected object. This assumes that this direction is set as "forwards" (Address ,
see Sub-section 6.1).
With a device ready for operation, first press the
key to select the menu item 0HDVXUHPHQW, and switch to the list of mea-
Use the
sured values using the
(QHUJ\ with the
key and switch to the table of energy measurements using the
key.
®
DIGSI
4
MENU
key. The 0($685(0(17 selection appears. Select the item
Operators Tools
®
DIGSI
4
key. The 0$,1 0(18 appears.
7-21