Changeover Of Setting Groups - Siemens SIPROTEC 7SJ62 Instruction Manual

Operators Tools
7.2.2

Changeover of Setting Groups

7-32
Figure 7-35 Setting Window in DIGSI
Double click on 7LPH 6\QFKURQL]DWLRQ in the data window. This give access to
change:
− Source of time synchronisation
− Time delay alarm
− Time format
− Time correction.
Figure 7-36 Window for Time Synchronization and Time Format Settings in DIGSI
Four different setting groups for the protective functions are available. The active
group can be changed onsite while the 7SJ62 is in-service by using the HMI on the
device or the operating interface on a PC running DIGSI
®
4
®
4. The active setting group
®
4
7SJ62 Manual
C53000-G1140-C121-1