Interoperability List; A.5 Interoperability List - Siemens SIPROTEC 7SJ62 Instruction Manual

Appendix
A.5

Interoperability List

1. Physical layer
1.1 Electrical interface
X EIA RS-485
1.2 Optical interface
X Glass fibre
X Plastic fibre
1.3 Transmission speed
X 9600 bit/s
2. Link layer
There are no choices for the link layer
3. Application layer
3.1 Transmission mode for application data Mode 1 (least significant octet first) as defined in 4.10 of
IEC 60870-5-4
3.2 Common address of ASDU
X One common address of ADSU
(identical with station address)
3.3 Selection of standard information numbers in monitor direction
3.3.1 System functions in monitor direction
X 0 End of general interrogation
X 2 Reset FCB
X 4 Start/restart
3.3.2
3.3.3
3.3.4 see separate table in the device manual (Information List in the following section)
3.3.5
3.3.6
3.3.7 Measurands in monitor direction
X 144 Measurand I
146 Measurand I, V, P, Q
148 Measurands I
3.3.8 Generic functions in monitor direction
240 Read headings of all defined groups
243 Read directory of a single entry
245 End of general interrogation generic
data
X 250 Write entry with execution
3.4 Selection of standard information numbers in control direction
3.4.1 System functions in control direction
X 0 Initiation of general interrogation
3.4.2 General commands in control direction
X 16 Auto-recloser on / off
X 18 Protection on / off
X 23 Activate characteristic 1
X 25 Activate characteristic 3
A-28
, V , P, Q, f
L1,2,3 L1,2,3
X Number of loads for one equipment: 32
F-SMA type connector
X BFOC/2,5 type connector
X 19200 bit/s
More than one common address of ASDU
X 0 Time synchronization
X 3 Reset CU
X 5 Power on
X 145 Measurands I, V
147 Measurands I
241 Read values of all entries of one group
244 Read value of a single entry
249 Write entry with confirmation
251 Write entry aborted
X 0 Time synchronization
17 Teleprotection on / off
X 19 LED reset
X 24 Activate characteristic 2
X 26 Activate characteristic 4
, V
N EN
7SJ62 Manual
C53000-G1140-C121-1