7SJ62 Manual
C53000-G1140-C121-1
the display will be unreadable and that no operation will be possible using the integrat-
ed operator control panel. Therefore, the preset contrast value should only be
changed in small steps (1 or 2 levels).
q
When the device is ready for operation, first press the
pears.
q
key, select the menu item 6HWWLQJV, and switch to the settings using
Using the
key. The 6(77,1*6 menu appears.
the
q
key, select the menu item 6HWXS([WUDV and switch to the selection
Using the
6(783(;75$6 using the
q
key, select the menu item &RQWUDVW.
Using the
q
If a change of the contrast of the integrated LCD is desired, press the
existing setting appears in a frame with a blinking cursor.
q
Overwrite the present setting with the desired setting using the numerical keys. The
setting range is [11 to 22].
q
Confirm the change with the
Exit the menu using the
6(783(;75$6
'DWH7LPH
&ORFN 6HWXS
6HULDO 3RUWV
'HYLFH,'
0/)%9HUVLRQ
!&RQWUDVW
Figure 3-3
Operating Sub-menu for Adjusting the Display Contrast
key. See Figure 3-3.
key, or cancel the change with the
ENTER
key, or return to the main menu using the
ESC
²!
²!
²!
²!
²!
²!
6(783(;
ENTER
Initial Inspections
key. The 0$,1 0(18 ap-
MENU
ENTER
ESC
key.
MENU
0/)%9H
Q
²!
&RQWUDVW
²!
key. The
key.
3-7