SIPROTEC 4 Devices
Settings
®
Figure 4-23
DIGSI
4, Entering Settings for a Protective Function, example
Changing Setting
Groups
4-28
Double click on a protective function shown in the smaller window of Figure 4-22 to
obtain a window for entering the general settings associated with the function and the
settings of the protective elements belonging to the function.
The setting groups can be changed during operation using DIGSI
the device, by triggering binary inputs, or via the system interface. The active setting
group is indicated.
&+$1*( *5283
$&7,9( *5283
*URXS $
&+$1*( WR
*URXS $
*URXS $
*URXS %
*URXS &
*URXS '
%LQDU\ ,QSXW
,(&²²
®
Figure 4-24
SIPROTEC
via protocol
4 Device, Changing Setting Groups on the HMI
f
®
4, from the HMI on
7SJ62 Manual
C53000-G1140-C121-1