Specifying The Original Scan Size Using Numeric Values - Sharp MX-6580N User Manual

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
SPECIFYING THE ORIGINAL SCAN SIZE USING
NUMERIC VALUES
When scanning a non-standard size original such as a card or postcard, specify the original size using numeric values
after placing the original.
The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to 11-5/8" (25 mm to 297 mm).
When the scan size is specified by numeric values, the send size cannot be specified.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 5-10)
Tap the [Original] key.
2
After tapping the "Scan Size" key, tap the [Direct Entry] key.
3
4
Address Book Address
Scan Size
Auto A4
AB Inch
X 17
Others
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use
Tap the [Execute] key.
5
After the settings are completed, tap
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.
Touch to input Address Background Adjustment
Slow Scan Mode
Scan Thin Paper Original
Blank Page Skip
Skip Blank Page in Original
Color Mode
Direct Entry Custom Size
Sharpness
Adjust Outline of Image
( 1~11 5/8 )
11
Y
inch
Preview
( 1~11 5/8 )
inch
Execute
to finely adjust the entered size.
twice.
Specify the original size.
CA
Start
5-48