Sharp MX-6580N User Manual page 164

BEFORE USING THE MACHINE►MAINTENANCE
8
Boss
(2)
9
REPLACING THE CLEANER
1
(1)
(3)
Replace the cleaning tool.
(1) Engage the cleaning tool onto the boss
and turn it around it, and then put the
edge (non-cleaner side) on the right-hand
hook.
(2) Put the left-hand side of the cleaning tool
over the hook to place it on the near side.
(3) Turn the cleaning tool onto hook.
Close the front cover.
Open the front cover and take out a
replacement cleaner.
Replacement cleaners are stored in the front cover.
Grasp the end of the cleaner and pull it out of the cover.
1-161