Specifying The Original Scan Size And Send Size (Enlarge/Reduce) - Sharp MX-M950 Software Manual

SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE (Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the
scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
☞
Standard Sizes
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
☞
Specifying the original scan size (by paper size)
Specifying the original scan size (by numerical values)
Scan Internet Fax
Address Book
Address Entry
Send Settings
Address Review
File
Special Modes
Quick File
"Scan Size"
"Send Size" is set to
5-1/2" x 8-1/2" (B5)
8-1/2" x 11" (A4)
(page 24)
Fax Data Entry
Original Scan: Auto 8½x11
Exposure Auto Text
Resolution 200X200dpi
File Format PDF
Color Mode Mono2
Transmission
(page 71)
(page 72)
70
USB Mem. Scan
Send: Auto
PDF
The image is reduced to
5-1/2" x 8-1/2" (B5)
before transmission