Sharp MX-6580N User Manual page 226

COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Booklet
Select Output Binding Edge.
Off
Left Binding/
Tablet
Right Binding
Others
• The original will be scanned from the innermost side when folded.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Divide],
[Continue], or [Cancel] key.
[Divide]:
[Continue]:
[Cancel]:
To cancel the Saddle Stitch:
Tap the [Off] key.
Trimmer Setting
1
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Offset
Sort/Group Staple
Off
Saddle
1 Staple
Stitch
Trimmer
2 Staples
Setting
Others
2
Output
Trimmer Setting
Set Trimming Width.
Off
On
Others
To cancel the Trimmer Setting:
Tap the [Off] key.
N-Up
No. of copies 1
Put Multiple Pages in A Page
Erase
Erase Shadow Around
Select Original Type.
1-Sided
2-Sided
Booklet
Proof Copy
2-Sided
Tablet
Preview
Cover Setting
B/W
3 8½x14
Start
4 11x17 8½x11
Divides the pages into sets that can be stapled and sorts them. You cannot use this function if the
cover settings are selected.
Continues sorting without stapling.
Cancels the staple sort setting.
Original
No. of copies
Change Size/Direction.
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Erase
Erase Shadow Around
Separator Page
Punch Fold
Proof Copy
Preview
Original
B/W
3 8½x14
Start
4 11x17 8½x11
Erase
No. of copies 1
Erase Shadow Around
Full Bleed Copy
( 2.0~20.0 )
2 0
Proof Copy
mm
Preview
B/W
3 8½x14
Start
4 11x17 8½x11
Tap the [Left Binding/Tablet] or [Right
Binding] key to select an original and
configure the cover sheet setting.
After the settings are completed, tap
CA
Color
Start
When Saddle Stitch is selected, tap the
[Trimmer Setting] key.
CA
Color
Start
Tap the [On] key, and specify the
trimming width.
Tap the numeric value display field of the trimming width,
and enter the allowable range using the numeric keys.
Otherwise, tap
.
CA
Color
Start
2-52
.
. After the settings are completed, tap