Stapling Output/Punching Holes In Output - Sharp MX-6580N User Manual

PRINTER►FREQUENTLY USED FUNCTIONS
STAPLING OUTPUT/PUNCHING HOLES IN
OUTPUT
Staple function
The staple function staples the output. To create materials with more sophisticated appearance, the staple function can
be used in combination with 2-sided printing.
This function saves considerable time when preparing handouts for a meeting or other stapled materials.
The stapling positions and the number of staples can be selected to obtain the following stapling results.
Staple
1 Staple*
2 Staples
* The staple orientation ("
Punch function
The punch function punches holes in the output. The punch hole positions are set by selecting the binding edge.
• A finisher or saddle stitch finisher is required to use the staple function.
• To use the punch function, installing a punch module in the finisher or saddle stitch finisher.
• For the maximum number of sheets that can be stapled, see "SPECIFICATIONS" in the Start Guide.
• The maximum number of sheets that can be stapled at once includes any covers and/or inserts that are inserted.
• For information on the saddle stitch function, see
• The staple and offset (shifting the position of the paper that is output for each job) functions cannot be used
simultaneously.
• When the finisher is disabled in the machine's settings, the staple function and punch function cannot be used.
• When the staple function or the punch function is disabled in the machine's settings, stapling or punching is not possible.
Left
" or " ") varies depending on the size and orientation of the paper.
Left Right
Right
Top
"CREATE A PAMPHLET (BOOKLET/SADDLE STITCH) (page
3-27
Top
3-29)".