Pcl Settings; Postscript Settings - Sharp MX-6580N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

PCL Settings

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Setup Items
PCL Symbol Set Setting
PCL Font Setting
PCL Line Feed Code
Wide A4

PostScript Settings

When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and
whether or not the PostScript data is received in binary format.
Setup Items
Screen Settings
Print PS Errors
Binary Processing
OOXML Settings
To print an Excel file by direct print, select a sheet (with the part to be printed selected) or the entire book.
Print Release Settings
Select this option to use the E-mail printing. The memory area for saving print release jobs is 64 GB. For detailed
information, see "Print Release Settings Guide".
Specify the symbol set used for printing.
Select a font used for printing.
This setting is used to select how the printer responds when a line
feed command is received.
When this is enabled, 80 characters per line are printed on the
8-1/2" x 11" (A4) size paper using a 10-pitch font. (When this
setting is disabled, up to 78 characters are printed per line.)
Configure image settings for PostScript.
When a PS (PostScript) error occurs during PostScript printing,
this setting determines whether or not an error notice is printed.
Configure image settings for PostScript.
Settings
Settings
8-92
Setting
• Select from 35 items.
• Internal Font
• Extended Font
• (List of internal fonts when
extended fonts are not
installed.)
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF;
LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF;
FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF;
FF=CR+FF
• (Enabled)
• (Disabled)
Setting
Standard, Text/Photo, Text,
Photo, Dot (High Line
Number), Dot (Low Line
Number)
(Enabled)
(Disabled)
(Enabled)
(Disabled)