Document Feeder Tray - Sharp MX-6580N User Manual

COPIER►OTHER FUNCTIONS
• Mixed originals cannot be used in combination with the following functions:
Standard size setting or size entry setting for the Original Size, folding setting other than Z-Fold
If different widths are selected for mixed originals, the following functions cannot be used.
Staple, Punch, N-Up, Offset, Booklet, Full Bleed Copy
• The mixed size original function cannot be used to copy originals that are the same size but are placed in different
orientations (8-1/2" x 11" and 8-1/2" x 11"R (A4 and A4R), etc.).
To set the machine to always scan mixed originals
• In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Original Feeding
Mode].
• Output, N-Up, and other functions will have the same settings as the first page.
Tap the [Others] key, and tap the [Mixed Size Original] key.
1
2
Others
Mixed Size Original
Off
Same Width
Different Width
Back
To cancel the mixed size original setting
Tap the [Off] key.
3
8-1/2" x 14"
(B4)
For mixed size originals, set "Original" to "Auto".
Tap the [Color Start] or [B/W Start] key to start copying.
4
Original
Change Size/Direction.
2-Sided Copy
Place the same width
Proof Copy
originals.
Preview CA
B/W Color
3 8½x14
Start Start
4 11x17 8½x11
Place the originals with the
corners aligned together in
far left corner.
11" x 17"(A3)
2-104
Tap the [Same Width] key or the
[Different Width] key as appropriate for
the originals.
After the settings are completed, tap
Place the original face up on the

document feeder tray.

Place the original as shown on the Mixed Size Original
screen.
twice.