Auto Detection - Sharp MX-6580N User Manual

Digital full color multifunctional system

Hide thumbs Also See for MX-6580N:

Table of Contents

FACSIMILE►BASIC TRANSMISSION METHODS

AUTO DETECTION

When the original is placed, its size is automatically detected.

In normal mode, the size of the placed original is shown as the "Scan Size" and the transmission size is shown as the

"Send Size" in the initial screen.

Address Book

Slow Scan Mode

Mixed Size Orig.

Original Count

reception memory

In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the

scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission.

• Only standard original sizes can be automatically detected.

► Standard sizes (page 2-11)

• When the original size is an inch size or a non-standard size, or if the size is not detected correctly, manually specify the

original scan size.

► SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 4-45)

► SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 4-46)

Sending History

Call Search Number

Verification Stamp

Call Program

Call Registered settings

Send Same Image

as Fax Address

"Send Size" is set

to 5-1/2" x 8-1/2"

8-1/2" x 11" (A4)

The image is reduced

to 5-1/2" x 2-1/2" (B5)

before transmission

Table of Contents