Sharp MX-6580N User Manual page 740

MANUAL FINISHING►PAPERS
PAPERS
CHECKING TYPE AND SIZE OF PAPER
You can check the type and size of paper loaded in the inserter on the display to the right of [Upper Tray] or [Lower Tray]
key.
The paper size is automatically detected when paper is loaded. To set the paper type and size, tap the [Type and Size]
key. Paper types and sizes can be specified for each of the upper and lower trays.
Output Tray
Upper Tray
Middle Tray
Lower Tray
Staple Punch
Off Off
1 Staple 2 Hole
at Back Punch
1 Staple Saddle
Half Fold
at Front Stitch
2 Staples
• If the paper loaded is different from the type that is indicated on the right of the key, tap the [Type and Size] key or change
the settings in "Settings".
• Special media such as transparency film and tab paper cannot be used.
To change the paper settings for the paper you load in the inserter:
Tap the [Type and Size] key or in "Settings", select [System Settings] → [Common Settings] → [Paper Settings] → [Paper
Tray Settings] → [Inserter(Upper)] or [Inserter(Lower)].
If the paper size is not correctly detected or paper of a non-standard size or type is loaded, specify this setting.
Inserter
Plain 1
Upper Tray
8½x11
Plain 1
Lower Tray
8½x11
Type and Size
Fold
Accord-
Off Copies/Pages
ion Fold
Saddle Double
Fold Fold
CA
Z-Fold
Start
C-Fold Detail
7-5