Changing Output Destination - Sharp MX-6580N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

CHANGING OUTPUT DESTINATION

Specify the destination to output copies.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
Tap the [Output] key.
2
3
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray Offset
Sort/Group Staple
Auto
Sort
Group
Others
• If a finisher (100-sheet stapling) or saddle stitch finisher (100-sheet stapling) is installed, select the [Upper Tray],
[Middle Tray] or [Lower Tray] key.
• If a finisher (50-sheet stapling) or saddle stitch finisher (50-sheet stapling) is installed, select the [Upper Tray] or
[Lower Tray] key.
Original
No. of copies
Change Size/Direction.
2-Sided Copy
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Erase
Separator Page
Erase Shadow Around
Punch Fold
Proof Copy
Preview
B/W Color
3 8½x14
Start Start
4 11x17 8½x11
Select the output tray from "Output
Tray".
After the settings are completed, tap
CA
2-43
.