Printing Received Data At A Specified Time - Sharp MX-6580N User Manual

FACSIMILE►FAX RECEPTION

PRINTING RECEIVED DATA AT A SPECIFIED TIME

You can start printing the received data at a specified time.
For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you
do not urgently need to print.
Set to print data
received during the day
at 20:00
• The printed data is automatically deleted from memory.
• If the power is turned off at the specified time, printing will start at the timing when the power is turned on.
• This function can be used when "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Common
Settings] → [Condition Settings] → [Preview Setting] → [Received Data Image Check Setting] is enabled.
If Hold Setting for Received Data Print is enabled, this function is not available.
• To print received data at the specified time:
In "Settings", select [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings]
→ [Time Specified Output of Received Data].
• To disable the hold setting for received data print:
In "Settings (administrator)", disable this function using [System Settings] → [Image Send Settings] → [Common Settings]
→ [Condition Settings] → [Hold Setting for Received Data Print].
At 20:00, printing
begins automatically
4-58
Prints