SYSTEM SETTINGS►STATUS
Firmware Version
Shows the firmware version of the machine as a list.
This function requires administrator rights.
Power Reset
The Power Reset screen enables you to restart the machine or enter the power save mode.
This function requires administrator rights.
Item
Reboot the MFP
Enter the Power Save Mode
Data List
Lists showing the settings and information registered in the machine can be printed.
The two-sided or one-sided list printing setting is determined by Device Control - Data List - 1-Sided/2-Sided.
List for User
List name
Machine Status List
Printer Test Page
Sending Address List
Document Filing Folder List
Reboots the machine.
Tapping the [Execute] key opens the Restart screen, and then tapping the [Execute] key
again restarts the machine.
Shifts the machine to power save mode.
Tap the [Execute] key to open the power save mode screen.
This list shows information needed by regular users, such as hardware statuses, software
statuses, printer environment settings, and paper tray settings.
This is used to print the PCL Symbol Set List, various font lists, and the NIC page (network
interface settings, etc.).
• PCL Symbol Set List
• PCL Internal Font List
• PCL Extended Font List
• PS Font List
• NIC Page
Lists can be printed of various addresses stored in the machine.
• Individual List
• Group List
• Memory Box List
This shows the folder names for document filing.
8-52
Description
Description