Specifying The Original Scan Size Using Numeric Values - Sharp MX-6580N User Manual

FACSIMILE►BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE USING
NUMERIC VALUES
When scanning a non-standard size original such as a postcard, specify the original size by numeric values after placing the
original. The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to 11-5/8" (25 mm to 297 mm).
When the scan size is specified by numeric values, the send size cannot be specified.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 4-8)
Tap the [Original] key.
2
3
Address
Address Book
Original
Scan Size
Auto 8½x11
2-Sided
Tablet
2-Sided
Booklet
Others
4
Address Book Address
Scan Size
Auto 8½x11
AB Inch
17
X
Others
Tap the [Enter] key.
5
After the settings are completed, tap
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.
Dual Page Scan
Fax Number
Divide into 2 Pages
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Send Size
100%
Auto 8½x11
Image Orientation
Preview
Speaker
reception memory 100%
Dual Page Scan
Fax Number
Divide into 2 Pages
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Direct Entry Custom Size
(1 ~ 11 5/8)
11
Y
inch
(1 ~ 17)
Preview
inch
Execute
Speaker
reception memory 100%
twice.
Tap the [Scan Size] key.
CA
Start
Tap the [Direct Entry] key, and enter
the scan size.
• Tap the areas displaying width and height sizes
respectively, and enter the sizes using the numeric keys.
• It is convenient to use
size.
CA
Start
4-46
to finely adjust the entered