Punch Module (Mx-Pn12B); Discarding Punch Waste - Sharp MX-6580N User Manual

BEFORE USING THE MACHINE►PERIPHERAL DEVICES

PUNCH MODULE (MX-PN12B)

The punch module can be installed on a finisher (50-sheet stapling) or saddle stitch finisher (50-sheet stapling) to punch
holes in paper to be output.
A finisher (50-sheet stapling) or saddle stitch finisher (50-sheet stapling) is required to install the punch module.

DISCARDING PUNCH WASTE

Punch waste from punched holes is collected in the punch waste box.
Follow the operation procedure to replace punch waste.
1
2
Open the front cover.
Grasp the punch waste box handle,
gently pull out the box, and discard the
punch waste.
Discard the punch waste in a plastic bag or other container,
taking care not to let the waste scatter.
1-145