Updating The Dmi/Smbios Data - Lenovo BladeCenter HX5 7873 Problem Determination And Service Manual

imm_password
The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a
zero, not a letter O).
The following commands are examples of using the user ID and password default values and not
using the default values:
Example that does not use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoUUID uuid_value host imm_ip
user user_id password password
Example that does use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SysInfoUUID uuid_value host imm_ip
• Bootable media: You can also build a bootable media using the applications available at http://
www.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=TOOL-
CENTER&brandind=5000016..
Step 5. Restart the blade server.

Updating the DMI/SMBIOS data

The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use the
Advanced Settings Utility to update the DMI.
To download the ASU and update the DMI, complete the following steps.
1. Download the Advanced Settings Utility (ASU) from http://www.ibm.com/systems/support/supportsite.
wss/docdisplay?lndocid=TOOL-ASU&brandind=5000016.
2. ASU sets the DMI in the IMM. Select one of the following methods to access the IMM to set the DMI:
• Online from the target system (LAN or keyboard console style (KCS) access)
• Remote access to the target system (LAN based)
• Bootable media containing ASU (LAN or KCS, depending upon the bootable media)
Note: IBM provides a method for building a bootable media. You can create a bootable media using
the Bootable Media Creator (BoMC) application from http://www.ibm.com/systems/support/
supportsite.wss/docdisplay?lndocid=TOOL-BOMC&brandind=5000016. In addition, the Windows-
based and Linux-based toolkits are also available to build a bootable media.
3. Copy and unpack the ASU package, which also includes other required files, to the server. Make sure
that you unpack the ASU and the required files to the same directory. In addition to the application
program (asu or asu64), the following files are required:
• For Windows-based operating systems:
– ibm_rndis_server_os.inf
– device.cat
• For Linux-based operating systems:
– cdc_interface.sh
4. After you unpack ASU. Use the following syntax: asu set SYSTEM_PROD_DATA.SysInfoProdName m/t_model
[access_method]
asu set SYSTEM_PROD_DATA.SysInfoSerialNum s/n [access_method]
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag asset_tag[access_method]
Where:
m/t_model
.
Chapter 2 Configuring the blade server
27