Table of Contents
Advertisement
To open and remove the blade server cover, complete the following steps.
Step 1.
Before you begin, read "Safety" on page v and "Installation guidelines" on page 65.
Step 2.
If the blade server or scalable blade complex is installed in a BladeCenter chassis, remove it. See
"Removing the blade server from the BladeCenter chassis" on page 66 for instructions.
Step 3.
Carefully lay the blade server on a flat, static-protective surface, orienting the blade server with the
bezel pointing toward you.
Step 4.
Press the blade server cover release on each side of the blade server, topmost blade server in a
scalable blade complex, or expansion unit, and lift the cover away from the blade server, as shown
in the following illustration.
Blade server
cover
Cover
pins
Step 5.
Lay the cover flat or store it for future use.
Statement 12
CAUTION:
The following label indicates a hot surface nearby.
Statement 21
CAUTION:
72
BladeCenter HX5 Blade ServerProblem Determination and Service Guide
Blade server
cover release
Advertisement
Table of Contents
