Table of Contents
Advertisement
Step 6.
Loosen each screw on the 2-node scalability card, using the provided 3/16" hex driver. Alternate
the loosening of each screw until both screws are removed.
Step 7.
Lift the 2-node scalability card off both blade servers and store the card in a safe place.
Alignment
pins
Note: When you remove the 2-node scalability card, the BladeCenter HX5 blade servers are no
longer scaled; each blade server operates independently in a chassis. You do not need to remove
the scalability tray from the topmost blade server as long as you install the two blade servers in
adjacent blade server bays. If you do remove the scalability tray, you must also install a cover on
the bottom blade server.
Step 8.
If you are instructed to return the 2-node scalability card, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
84
BladeCenter HX5 Blade ServerProblem Determination and Service Guide
Alignment
pins
Advertisement
Table of Contents
