Table of Contents
Advertisement
Description
Switch number
SW2 - 1
Reserved
SW2 - 2
Force power on
SW2 - 3
Trusted Platform Module
(TPM) physical presence
SW2 - 4
Password override switch
SW2 - 5
Real time clock (RTC) reset
SW2 - 6
Reserved
SW2 - 7
Flash bank select
SW2 - 8
Wake on LAN (WOL) disable
SW2 - 9
Force H8 update
Reserved
SW2-10
Blade server connectors - IBM MAX5
Use this information to locate the IBM MAX5 expansion blade connectors.
The following illustration shows the system board components, including connectors for user-installable
optional devices, in the IBM MAX5 expansion blade.
14
BladeCenter HX5 Blade ServerProblem Determination and Service Guide
Switch setting
The default position is off.
The default position is off.
The default position is off.
The default position is off.
The default position is off.
The default position is off.
The default position is off.
Definition
Turning this switch to the on
position forces the blade
server to power on
Turning this switch to the on
position indicates a physical
presence to the TPM.
Turn this switch to the on
position overrides the power
on password.
Turning this switch to the on
position resets the RTC. A
momentary toggle is all that
is required. To avoid
excessive battery drain, do
not leave this switch on.
Turning this switch to the on
position forces the blade to
boot from the backup UEFI
image.
Turning this switch to the on
position disables WOL.
N/A
Advertisement
Table of Contents
