Table of Contents
Advertisement
A set of blank labels for your blade server comes with the BladeCenter chassis. When you install the blade
server in the BladeCenter chassis, write identifying information about the blade server on a label. Then place
the label on the BladeCenter chassis bezel. See the documentation for your BladeCenter chassis for
recommended label placement.
Important: Do not place the label on the blade server itself or in any way block the ventilation holes on the
blade server.
In addition, the system service label, which is on the cover of the server, provides a QR code for mobile
access to service information. You can scan the QR code using a QR code reader and scanner with a mobile
device and get quick access to the IBM Service Information website. The IBM Service Information website
provides additional information for parts installation and replacement videos, and error codes for server
support.
The following illustration shows the QR code (http://ibm.co/114H7dt):
Figure 1. QR code
Related documentation
Use this information to identify and locate related blade server documentation.
This Problem Determination and Service Guide contains information to help you resolve problems yourself,
and it contains information for service technicians. The following documentation is also available:
• Installation and User's Guide
This document contains general information about the blade server, including how to install supported
optional devices and how to configure the blade server.
• Safety Information
This document contains translated caution and danger statements. Each caution and danger statement
that appears in the documentation has a number that you can use to locate the corresponding statement
in your language in the Safety Information document.
• Warranty Information
This document contains information about the terms of the warranty.
• Environmental Notices and User Guide
This document contains translated environmental notices.
• Integrated Management Module User's Guide
This document explains how to use the functions of the IMM that is installed in an IBM server. The IMM
works with IBMSystem x Server Firmware to provide systems-management capability for System x and
BladeCenter servers.
• Advanced Management Module User's Guide
This document provides information about configuring the advanced management module and managing
components that are installed in an IBM® BladeCenter® chassis.
• Advanced Management Module Command-Line Interface Reference Guide
.
3
Chapter 1
Introduction
Advertisement
Table of Contents
