Table of Contents
Advertisement
Step 5.
If an optional expansion unit is installed, remove the expansion unit (see "Removing an expansion
unit" on page 96 for instructions).
Note: Optional expansion units are not supported when a IBM MAX5 expansion blade is installed.
Step 6.
If an IBM MAX5 expansion blade is installed, remove it (see "Removing an IBM MAX5 expansion
blade" on page 87 for instructions).
Step 7.
Open the blade server cover (see "Removing the blade server cover" on page 71 for instructions).
Step 8.
If a CFFh expansion card is installed, remove it (see "Removing a CFFh expansion card" on page
119 for instructions).
Step 9.
Insert the back of the SSD expansion card into the expansion-card standoffs on the blade server
and rotate the expansion card down toward the system board.
Note: The expansion card standoff in the middle of the blade server has two slots. The top slot is
for the CFFh expansion card. Be sure to insert the SSD expansion card into the bottom slot of the
expansion-card standoff that is located in the middle of the blade server.
Step 10. Carefully push down on the SSD expansion card (pressing on the blue label) until the expansion
card is seated.
Note: Make sure that the expansion card lever is in the closed position.
Expansion
card
standoff
Step 11. Install the CFFh expansion card, if you removed one from the blade server (see "Installing a CFFh
expansion card" on page 122 for instructions).
Step 12. If the blade server is part of a scalable blade complex, assemble the scalable blade complex (see
"Assembling a scalable blade complex" on page 70 for instructions).
Step 13. Install the IBM MAX5 expansion blade if you removed one (see "Installing an IBM MAX5 expansion
blade" on page 88 for instructions).
Step 14. Install the optional expansion unit, if you removed one from the blade server (see "Installing an
expansion unit" on page 97 for instructions).
Step 15. Install the cover onto the blade server (see "Installing the blade server cover" on page 73 for
instructions).
Step 16. Install the blade server or scalable blade complex into the BladeCenter chassis (see "Installing a
blade server in a BladeCenter chassis" on page 67 for instructions).
100
BladeCenter HX5 Blade ServerProblem Determination and Service Guide
Expansion
card
standoff
Expansion
card
Advertisement
Table of Contents
