Table of Contents
Advertisement
The server machine type and model number. Type mtm xxxxyyy, where xxxx is the machine type and
yyy is the server model number.
s/n
The serial number on the server. Type sn zzzzzzz, where zzzzzzz is the serial number.
asset_method
The server asset tag number. Type asset aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa, where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the asset tag number.
[access_method]
The access method that you select to use from the following methods:
• Online authenticated LAN access. Use the following syntax: [host imm_internal_ip] [user imm_user_
id][password imm_password]
imm_internal_ip
The IMM internal LAN/USB IP address. The default value is 169.254.95.118.
imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a zero, not
the letter O).
Note: If you do not specify any of these parameters, ASU uses the default values. When the default
values are used and ASU is unable to access the IMM using the online authenticated LAN access
method, ASU automatically uses the following unauthenticated KCS access method.
The following commands are examples of using the user ID and password default values and not
using the default values:
Examples that do not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoProdName m/t_model –user imm_user_id–password imm_password
asu set SYSTEM_PROD_DATA.SYsInfoSerialNum s/n–user imm_user_id –password imm_password
asu set SYSTEM_PROD_DATA.SYsEncloseAssetTag asset_tag –user imm_user_id–password imm_
password
Examples that do use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName m/t_modelasu set SYSTEM_PROD_DATA.SysInfoSerialNum
s/nasu set SYSTEM_PROD_DATA.SysEncloseAssetTag asset_tag
• Online KCS access (unauthenticated and user restricted): You do not need to specify a value for
access_method when you use this access method.
The KCS access method uses the IPMI/KCS interface. This method requires that the IPMI driver is
installed. Some operating systems have the IPMI driver installed by default. ASU provides the
corresponding mapping layer. See the Advanced Settings Utility Users Guide for more details. You
can access the ASU Users Guide from http://www.ibm.com/systems/support/supportsite.wss/
docdisplay?lndocid=TOOL-ASU&brandind=5000016.
The following commands are examples of using the user ID and password default values and not
using the default values:
Examples that do not use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoProdName m/t_model
asu set SYSTEM_PROD_DATA.SYsInfoSerialNum s/n
asu set SYSTEM_PROD_DATA.SYsEncloseAssetTag asset_tag
• Remote LAN access. Use the following syntax:
28
BladeCenter HX5 Blade ServerProblem Determination and Service Guide
Advertisement
Table of Contents
