Table of Contents
Advertisement
ToolsCenter Suite CLI provides the corresponding mapping layer. For more details, see the
Lenovo ToolsCenter Suite CLI Users Guide. To access this guide, do the following:
1. Go to http://www.lenovo.com/support.
2. Click the Downloads tab at the top of the panel.
3. Under ToolsCenter, select View ToolsCenter downloads.
4. Select Lenovo ToolsCenter Suite CLI.
5. Scroll down and click the link and download Lenovo ToolsCenter Suite CLI version for
your operating system. Scroll down and look under Online Help to download the Lenovo
ToolsCenter Suite CLI Users Guide.
• Remote LAN access, type the command:
Note: When using the remote LAN access method to access IMM2 using the LAN from a client,
the host and the imm_external_ip address are required parameters.
[imm imm_user_id:imm_password@imm_externaln _ip]
Where:
imm_external_ip
The external IMM2 LAN IP address. There is no default value. This parameter is required.
imm_user_id
The IMM2 account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM2 account password (1 of 12 accounts). The default value is PASSW0RD (with
a zero 0 not an O).
Example that does not use the user ID and password default values:
onecli config set SYSTEM_PROD_DATA.SYsInfoUUID <uuid_value> [imm imm_user_id:imm_password@imm_internal_ip]
Example that does use the user ID and password default values:
onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
• Bootable media:
You can also build a bootable medium using the applications available through the ToolsCenter
Web site at https://support.lenovo.com/us/en/ documents/LNVO-CENTER. From the
ToolsCenter page, scroll down for the available tools.
Step 5.
Restart the server.
Updating the DMI/SMBIOS data
The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use the
Advanced Settings Utility to update the DMI in the UEFI-based server.
The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use Lenovo
ToolsCenter Suite CLI to update the DMI in the UEFI-based server. Lenovo ToolsCenter Suite CLI is an online
tool that supports several operating systems. Make sure that you download the version for your operating
system. You can download Lenovo ToolsCenter Suite CLI from the Lenovo Web site. To download Lenovo
ToolsCenter Suite CLI and update the DMI, do the following:
Note: Changes are made periodically to the Lenovo Web site. The actual procedure might vary slightly
from what is described in this document.
Step 1.
Go to https://support.lenovo.com/us/en/documents/LNVO-TCLI. Then, find and download Lenovo
ToolsCenter Suite CLI version for your operating system.
42
HX1310, HX2310-E, HX3310, HX3310-F Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
