Step 3.
Remove the cover from the topmost blade server (see "Removing the blade server cover" on page
71 for instructions).
Step 4.
Stand the blade servers upright on a clean, flat work surface, with the 2-node scalability card facing
up.
Step 5.
Remove the 2-node scalability card (see "Removing the 2-node scalability card" on page 83 for
instructions).
Step 6.
Press the blade server cover release on each side of the blade server and lift the topmost blade
server from the bottom blade server as shown in the following illustration.
Blade server
cover release
Step 7.
Carefully lay the blade server on a flat, static-protective surface, with the cover side down.
Step 8.
Using a small screwdriver, press down on the spring plates to disengage them.
Step 9.
Pressing down firmly on the middle of the tray, slide the scalability tray back.
Secondary
BladeCenter HX5
blade server
Blade server
cover release
.
Chapter 4
Removing and replacing blade server components
79