Table of Contents
Advertisement
Step 6.
Attempt to pull the scalability tray back to ensure that the scalability tray is firmly seated.
Step 7.
Look in the holes on each side of the blade server to ensure that the spring plates are engaged.
Removing the 1-node speed burst card
Use this information to remove the 1-node speed burst card from a blade server.
To remove the 1-node speed burst card, complete the following steps.
Step 1.
Before you begin, read "Safety" on page v and "Installation guidelines" on page 65.
Alignment
pins
.
Chapter 4
Removing and replacing blade server components
81
Advertisement
Table of Contents
