Choose the menu VLAN→Protocol VLAN→Protocol Group to load the following page.
Configuration Procedure:
1)
Specify a Template ID and a VLAN ID.
2)
Add your desired ports into this protocol group.
3)
Click Apply to make the settings effective.
Entry Description:
Template Id:
VLAN ID:
7.5.3 Protocol Template
The Protocol Template should be created before configuring the Protocol VLAN. You can add
your desired Protocol Template on this page.
Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page.
Configuration Procedure:
1)
Specify a template ID and a name for the protocol template.
Figure 7-9 Configure Protocol Group
Specify a template ID for this group.
Enter the ID number of the Protocol VLAN. This VLAN should be
one of the 802.1Q VLANs the ingress port belongs to.
Figure 7-10 Create and View Protocol Template
92