Step 3 - Replace Filter - Christie Roadster S+12K Replacement Instructions Manual

+
S 12K / 14K / 16K / 20K Lamp & Filter Instructions

STEP 3 - REPLACE FILTER

Remove the old filter and insert a new one. Follow the airflow
arrows for correct orientation. Refer to Figure 8. The Roadster
S+20K model has a rhomboid-shaped filter; therefore, insert the
sharply angled corner first — place fully back on the left. Ensure
the triangular metal filter brace is installed after the filter has
been positioned. Refer to Figure 9.
Figure 9. Installing the Angled Air Filter (ROADSTER S
Available Filter Replacement Kits:
•
03-900546-01P: Five pack filter kit for 2.0kW and 2.4kW projectors
•
003-000-310: Five pack filter kit for 3.0kW projectors
STEP 4 - RE-INSTALL THE FILTER GRILLE/DOOR
Tighten the single top screw to secure the filter grille/door.
013-100049-03 (Rev.1) 7 of 8 Pages
Figure 8. Filter Airflow
+ 20K ONLY).